PE Tarpaulin Roll Stock for Greenhouses and Tents – Wholesale
ISO Certified
OEM / ODM
20+ Countries

PE Tarpaulin Roll Stock for Greenhouses and Tents – Wholesale

<p>Backed by three full production lines, 100% pre-shipment inspection, and samples dispatched within days for custom colour or print approval.</p>

40-500 GSM Greenhouse Cover PE Tarpaulin Roll Stock Tent Fabric UV Treated Waterproof
Detailed specifications available upon request. Please contact us for a customized quote.

Get a Custom Quote

Tell us your requirements -- we'll respond within 24 hours with a tailored offer.

Reply within 24 hours

Product Description

Backed by three full production lines, 100% pre-shipment inspection, and samples dispatched within days for custom colour or print approval.

Description

Roll-to-Roll Consistency — Every PE tarpaulin roll is weighed and color-checked against specification before container loading, eliminating batch drift across wholesale shipments.

Technical Specifications

Parameter Value
Product Type PE Tarpaulin
Material Polyethylene (high density weaving PE)
Weight Range 40–500 g/m²
Thickness Range 0.18–0.35 mm
Knitting Density 8×8 / 10×10 / 12×12
Tensile Strength Meridian 300–1200 N/5cm / Latitude 250–1000 N/5cm (test standard not stated)
Surface Treatment Double waterproof surfaces, UV treatment (test basis not stated), mildew proof, anti-aging
Grommets Reinforced rustproof grommets, 39.4 inches center-to-center spacing (source value — verify against manufacturer catalog)
Corners Reinforced corner patches
Size Custom size available
Color Custom color available
Certification ISO, CE

Application Suitability

Application Exposure & Requirement
Agricultural greenhouse covers Continuous solar UV, condensation drip, wind uplift on frame edges
Tent and canopy construction Crowd handling wear, repeated folding, seasonal rain exposure
Warehouse and yard coverage Forklift contact, stacking abrasion, prolonged sunlight
Truck and transport tarpaulins Road debris impact, constant tension from tie-downs, weather cycling
Industrial protective covers Dust and moisture ingress, chemical splash contact, equipment vibration
Outdoor event shelters Short-term UV, rain bursts, crowd handling and reconfiguration

Why Wholesale Buyers Lose Money on PE Tarpaulin Roll Stock

Color shift and weight discrepancy between rolls in the same shipment are the two most frequent complaints from tarpaulin importers.

When a container of PE tarpaulin roll stock arrives and three rolls show noticeably different shades once unrolled side by side, the entire batch may need to be sorted, discounted, or returned. Similarly, when the scale shows a roll at 135 g/m² while the invoice states 150 g/m², the distributor absorbs the margin loss or faces customer rejection. These are not rare defects — they are symptoms of suppliers who treat bulk orders as a single production pass without inline verification. [NEED_CITE: common quality disputes in imported PE tarpaulin shipments]

Waterproof PE tarpaulin roll stock for wholesale distribution

Batch Consistency Across Container Loads

Wholesale PE tarpaulin roll stock must arrive with uniform weight, color, and coating coverage from the first roll to the last. Production runs are monitored at the loom and after coating, so knitting density and surface finish stay within tolerance across the full order. This is the difference between a distributor who ships confidently to retail customers and one who field-complaints every quarter.

Width and Roll Length for Container Efficiency

Ordering PE tarpaulin roll stock in widths and lengths optimized for standard container dimensions reduces dead space and shipping cost per square meter. Rolls are packed with net weight, gross weight, and dimensions recorded per unit, so freight forwarders can plan loading sequences without guessing. Buyers specifying custom widths receive a packing plan that maps roll count to container capacity before production begins.

Coating Weight and Knitting Density Explained

The relationship between knitting density and coating weight determines how the fabric behaves under load. A PE tarpaulin with 8×8 density and lightweight coating at 80–110 g/m² flexes easily for greenhouse draping but offers limited tear resistance under sustained tension. Moving to 10×10 density at 120–150 g/m² balances flexibility with the tensile strength needed for warehouse and transport covers. At 12×12 density and 160–240 g/m², the tighter weave restricts tear propagation and supports heavier grommet spacing for industrial tie-down points. Coating weight alone does not indicate durability — a heavy coat on a loose weave will crack at the fold line before the base fabric reaches its tensile limit. [NEED_CITE: tensile and tear test methods for coated fabrics per ISO 1421]

Cross-section of PE tarpaulin weave and double-surface coating

The Cost of Underspecified Roll Stock

Ordering the lightest available grade for a transport application leads to grommet pull-through and seam failure within the first season, generating warranty claims that erase the initial savings. Specifying a color without requesting a production sample before the full run risks receiving rolls that cannot be sold to customers who install panels adjacent to one another. Missing UV treatment on outdoor-rated stock causes premature embrittlement, and the distributor — not the manufacturer — absorbs the replacement cost. These failures trace back to incomplete specifications at the inquiry stage, not to production errors. [NEED_CITE: typical failure modes in underspecified polyethylene tarpaulin]

Production Controls Behind Every Roll

Three full production lines and 36 sets of equipment allow bulk PE tarpaulin orders to run without compression of lead times. A 10-person R&D team handles custom color matching, width adjustment, and sample roll development before the production run is committed. Dedicated QA personnel inspect every roll for GSM, color, and surface coating integrity before dispatch. Samples are developed within days when custom color or print is required, giving wholesale buyers physical confirmation before the container is booked. Pre-shipment inspection records document weight and shade for each individual roll, not just the batch average.

Documentation & Verification

  • GSM verification per roll recorded on pre-shipment inspection sheet
  • Color reference and batch dye-lot number on material specification document
  • Roll packing list with individual net weight, gross weight, and dimensions
  • ISO and CE certificates included with shipping documentation
  • UV treatment test report supplied where applicable for the specified grade

Fabrication, Handling & Storage

  • Heat-seal temperature should be matched to coating weight — lighter grades require lower settings to avoid burn-through
  • Grommet installation at reinforced corner patches prevents pull-through under tie-down tension
  • Store rolls upright on pallets to prevent flat-spot deformation of the PE weave
  • Unroll in ambient temperature above freezing to avoid crease cracking in cold-stiffened material
  • Cut with sharp blade on flat surface; frayed edges on 8×8 density grades may require edge sealing
  • Clean with mild detergent — solvent-based cleaners degrade the waterproof surface coating

What to Include in Your Inquiry

Specify the target GSM grade, roll width, and total meterage so the quotation reflects your container plan. Confirm whether UV treatment or flame retardancy is required for your market, as test documentation is prepared per grade. State your color reference or request a sample roll for approval before the production run begins.

Frequently Asked Questions

Q: Can you guarantee the same colour across every roll in one order?
A: Inline color monitoring during coating ensures shade consistency across the full production run. A reference sample roll can be dispatched for your approval before bulk manufacturing, and the pre-shipment inspection record documents the color batch for each roll in the container.

Q: What is the minimum order by roll count or container load?
A: Minimum quantities depend on the selected GSM grade and custom color or width. Standard stock widths and colors carry lower thresholds, while custom specifications require a production run minimum. Contact us with your target grade and total meterage for a precise figure.

Q: Do you supply test reports for UV-treated grades?
A: UV treatment is available across the PE tarpaulin range, and test documentation is prepared for grades where the treatment is specified. Request the report for your selected grade during the inquiry stage so it accompanies the shipment paperwork.

Q: How is the tarpaulin packed and loaded for sea freight?
A: Each roll is individually wrapped with net weight, gross weight, and dimensions recorded on the packing list. Container loading plans are prepared based on roll count and total weight to maximize space utilization and minimize transit movement.

Q: Can I get a sample roll before placing a bulk order?
A: Sample rolls are produced within days for custom color, width, or print requirements. This allows you to verify GSM, shade, and coating finish against your specification before committing to full container production.

Why Choose Jinxiang Technology?

30 Years Experience

Founded in 1996, with deep expertise in PVC/PE tarpaulin and industrial duct manufacturing.

Multi-Certified Quality

ISO9001, ISO14001, ISO45001 & CE certified. Full-process quality inspection on every order.

OEM & ODM Ready

Dedicated R&D team of 10 technicians. Sample customization, pattern printing, and full branding support.

Global Reach

Trusted by wholesalers and distributors in 20+ countries. Factory-direct pricing with reliable delivery.

Send Product Inquiry

Fill in the form below and our sales team will get back to you within 24 hours with a competitive quote.

Submitting...

Your information is secure and will only be used to respond to your inquiry.

Direct Contact

Phone / WhatsApp

+86 137 9310 1270

Factory Address

No. 319, Jiqi Road, Huaiyin District,
Jinan City, Shandong, China

How We Work

  1. 1

    Consultation

    Confirm requirements & customization needs

  2. 2

    Sample

    Provide sample, adjust per your feedback

  3. 3

    Quotation

    Formal quote & contract signing

  4. 4

    Production

    Full-process QC inspection

  5. 5

    Delivery

    Ship after passing inspection

You might also be interested in these products

View All Products
PE Tarpaulin

PE Tarpaulin Roll Stock Wholesale – Bulk Supply

<p><strong>PE Tarpaulin, 50–220 g/m², HDPE Woven with LDPE Lamination</strong> — supplied by the roll in lightweight (8×8), medium (10×10) and heavy-duty (12×12) knitting densities. Roll widths from 2 m to 6 m, lengths 100 yards or 100 meters, with custom sizing available.</p> <ul> <li>Batch-to-batch GSM verified per production run, with documented weight tolerance</li> <li>Roll-to-roll colour consistency controlled at coating stage across the full container</li> <li>All four edges reinforced with PP rope, galvanized eyelets at 3 ft intervals</li> </ul> <p>Pre-shipment GSM samples weighed and documented per roll batch — ready for container loading with full packing list and customs documentation.</p>

View Details
PE Tarpaulin

PE Woven Plain Tarpaulin Roll Stock – Wholesale

<p><strong>PE Woven Plain Tarpaulin Roll Stock</strong> — waterproof, UV resistant, and mildew-proof with customizable sizes and colors for bulk buyers.</p> <ul> <li>Stock and custom widths with consistent roll-to-roll color and GSM tolerance across production runs</li> <li>Optimized container loading by roll count and weight, ideal for distributors stocking standard grades</li> <li>Sample approval process before bulk production ensures batch matching on your project</li> <li>Backed by 100% pre-shipment inspection, 36 sets of professional equipment for reliable bulk capacity, and full export documentation with every order</li> </ul>

View Details
PE Tarpaulin

PVC Coated Tarpaulin Roll Stock – Wholesale Supply

<p><strong>PVC Coated Tarpaulin Roll Stock</strong> — 350–750 gsm, laminated & hot-melt coated polyester mesh in 2m × 75m and 2.1m × 50m standard rolls.</p> <ul> <li>Multiple GSM grades and widths kept in stock for distributors and truck cover manufacturers buying by the roll</li> <li>Roll-to-roll colour consistency verified before dispatch, so covers match when installed side by side</li> <li>Weldable seams and high tear strength for downstream fabrication into truck curtains, tents and outdoor covers</li> </ul> <p>Dedicated QA at every coating stage with 100% pre-shipment inspection, container loading plans by roll count, and realistic minimums on custom colour or width.</p>

View Details

Ready to Source High-Quality Industrial Tarpaulins?

Get factory-direct pricing with full OEM/ODM support. ISO-certified quality, 30+ years of expertise, shipped to 20+ countries.

Average response time: < 24 hours  ·  No commitment required